4-2 HOW TO UPGRADE/INSTALL FIRMWARE
It is necessary to prepare the followings to upgrade/install the fi rmware.
1.Firmware fi le
2.WindowsPC (Network port is required.)
3.Peck.exe
4.Network cable (A cross cable is required when you connect the printer to PC directly.)
HOW TO UPGRADE FIRMWARE (Referential Time : 5 min)
Check the IP address of the printer.
1
Turn on the Main Power SW and Sub Power SW, then press
[MENU] key.
Select [SYSTEM INFO.]>[NETWORK]>[IP ADDRESS].
Turn off the Sub Power SW.
2
MENU
SYSTEM INFO.
SYSTEM INFO.
NETWORK
NETWORK
IP ADDRESS
IP ADDRESS
192.168.000.100
4-13
MENU
[ ]
[ ]
[ ]
[ ]
[ ]