Head Carriage Assembly_Replacement - Roland Color Camm Pro PC-60 Service Notes

3 Replacement of Main Parts

3-2 HEAD CARRIAGE ASSEMBLY_REPLACEMENT

Remove the RAIL COVER and disconnect the HEAD
1
CABLEs connected to CARRIAGE BOARD.
3
Remove ADJUSTING SCREW B, SCREW A and SCREW
2
B in order and remove the HEAD CARRIAGE.
Be careful not to lose the SPRING located at the left
side of HEAD CARRIAGE.
Remove the HEAD HOLDER together with the ADAPTER
3
by removing the 3 screws shown in the figure.
Fix the HEAD HOLDER together with the ADAPTER to
4
the HEAD CARRIAGE.
22
ADJUSTING SCREW B
SCREW A
SPRING
SCREW B
ADAPTER
SET SCREW
ADAPTER
SET SCREW
SCREW B
HEAD
HOLDER
HOLE FOR
POSITIONING
HEAD
HOLDER
HOLE FOR
POSITIONING