Others - Roland Color Camm Pro PC-60 Service Notes

6-3 OTHERS

BROKEN RIBBON
Is the machine used in the correct using
environment?
YES
Is the recommended media being used?
YES
Is media wrincled?
NO
Is RIBBON twisted?
NO
Is RIBBON CARTRIDGE rewinded or
disassembled once?
NO
Is the STRIPPING BAR on the HEAD
holding down the RIBBON OK?
YES
Is CASSETTE POSITION OK?
YES
Is THERMISTER OK?
YES
Is RIBBON CARTRIDGE SENSOR OK?
YES
Is HEAD VOLTAGE OK?
NO
Use it in the room temperature of 15ºC ~
30ºC.
NO
Use the recommended media.
YES
Use the media without wrincle.
YES
Correct the twisted part of RIBBON.
YES
Fix or replace the RIBBON CARTRIDGE.
NO
Replace HEAD CARRIAGE.
NO
Adjust the CASSETTE POSITION.
NO
Replace the HEAD CARRIAGE or
CARRIAGE BOARD.
NO
Replace the HEAD CARRIAGE.
NO
Adjust the HEAD VOLTAGE.
CARTRIDGE EXCHANGE ERROR
YES
Is the HOOK part on the CARTRIDGE
HOLDER distorted or broken?
NO
YES
Is the HOOK part on the HEAD CARRIAGE
broken?
NO
NO
Is the CARTRIDGE POSITION OK?
YES
NO
Is RIBBON CARTRIDGE SENSOR OK?
YES
NO
Is HEAD CARRIAGE fixed OK?
YES
NO
Is RF MOTOR DRIVER IC broken?
YES
NO
Are the HEAD CABLEs OK?
6 Trouble Shooting
Replace or fix the HOOK for the
CARTRIDGE HOLDER.
Replace the HEAD CARRIAGE.
Adjust CARTRIDGE POSITION.
Replace the HEAD CARRIAGE.
Fix the HEAD CARRIAGE again.
Replace IC4 on the MAIN BOARD.
Replace the HEAD CARRIAGE.
91
6