As Needed Maintenance; Cleaning The Exterior Surface Of The Printer; Cleaning The Touchscreen Display - Stratasys F170 Operation And Maintenance Manual

AS NEEDED MAINTENANCE

CLEANING THE EXTERIOR SURFACE OF THE PRINTER

The printer's exterior surfaces (doors and panels) may accumulate dust and periodically require
cleaning. Exterior doors and panels, with the exception of the touchscreen display, can be
cleaned using a slightly damp microfiber cloth (supplied in the Welcome Kit). The cloth should be
only slightly damp to ensure that water does not enter the printer. Excess water can cause
damage to interior components.

CLEANING THE TOUCHSCREEN DISPLAY

Caution: Using a cleaner which contains ammonia and/or alcohol can damage
the touchscreen. Only a suitable LCD cleaning solution and microfiber cloth
(included in the Welcome Kit) should be used to clean the touchscreen display.
As needed, to remove smudge marks and buildup, clean the touchscreen display using the LCD
cleaner and microfiber cloth provided in the Welcome Kit.
Apply an adequate amount of LCD cleaning solution to the provided microfiber cloth and then
gently wipe the exterior surface of the touchscreen display to clean its surface. It is
recommended that you apply LCD cleaner to the microfiber cloth rather than applying cleaner
directly to the touchscreen display, as excess moisture may damage the display.
84