Table of Contents
Advertisement
REMOVING A PART FROM THE PRINTER
Warning: Wear proper safety equipment when handling items inside the oven as
surfaces within the oven can be very hot.
To remove a part from the printer:
1.
Open the oven door.
2.
Push down on the substrate ejection handle to release the substrate.
Caution: Do not attempt to remove a part from the substrate while the substrate
is on the platen. Damage to the platen or platen level may occur.
3.
Remove the substrate from the platen.
4.
Carefully remove the part from the substrate.
79
Advertisement
Table of Contents
