Table of Contents
Advertisement
5.
The Load File page will display the contents of the USB flash drive. Locate the desired job and
select it by touching its row on the screen; doing so will open its Job Details page.
Note: If any USB port contain a flash drive, individual folder graphics will be
displayed on the screen representing each flash drive and its contents. Touching
the folder graphic on the screen will drill down into the folder and display its
contents. If a single flash drive is installed the job file(s) located on the flash
drive will be displayed in individual rows.
6.
Within the Job Details page press the Add to Queue button; this will load the job into the Job
Queue.
49
Advertisement
Table of Contents
