Table of Contents
Advertisement
PRINT JOB CONTROLS
A button is displayed within the Build page, just beneath the Build Status Display. This button is used to start,
pause, or abort a build, depending on the status of the printer. The Print button option will become selectable
after you've performed the steps necessary to load a file and the printer is in a state where it is ready to build a
part. This button will toggle to display the Pause and Abort button options when a build is in process.
PRINT BUTTON
The Print button allows you to start a build (see
The Print button can appear in the following states:
Button State
"Selecting a Job to Build" on page 120
Description
Printer is in a buildable state AND a selected job is available
to build.
Selecting the Print button will begin the build.
Print button is disabled and not selectable.
Printer is not in a buildable state OR a job is not selected/
available to build (i.e. queue is empty).
To troubleshoot this issue, touch the text displayed on the
screen within the Notifications Display. This will open a
dialog allowing you to view the reason(s) for the current
build state, including any issues impeding your ability to
start a build (i.e. no substrate, etc.). See
Start" on page 198
Starting" on page 200
44
for more information).
"Warnings at Build
and
"Errors Preventing a Build from
for more information.
Advertisement
Table of Contents
