USER MAINTENANCE
Warning: Always wear proper heat protective clothing when working inside the
oven.
Maintenance tasks must be performed on a regular basis in order to maintain optimal system operation. The
Maintenance Schedule table outlines the general maintenance schedule for the F123 Series. Detailed
instructions for each task make up the rest of this chapter.
The Replacement Consumables table lists part numbers for various replacement consumable items. Use the
part numbers listed in this table when ordering replacement parts from Stratasys or your regional Stratasys
office.
Maintenance Schedule
Weekly
Monthly
X
X
X
Replacement Consumables
Part Number
123-00300
123-00300
123-00307
123-00301
123-00302
123-00303
123-00304
123-00305
123-00306
As Needed
Maintenance Task
Clean the oven chamber
Clean the platen
Clean/Inspect the tip wipe assemblies
Clean the exterior surface of the printer
X
Clean the touchscreen display
X
Description
Model Head (standard)
Support Head (standard)
PLA Model Head
PLA Cooling Module
F170 substrate 1 box of 16
F270 substrate 1 box of 16
F370 substrate 1 box of 16
Tip shield kit - 4 sets
2-pack of tip wipe assemblies.
80