Stratasys F170 Operation And Maintenance Manual page 29

The following items are not located within the Welcome Kit. Instead, they can be found within the oven chamber
and the storage drawer. The items found within the oven chamber must be removed before powering the printer
ON.
5
Key for Figure 4
1 Substrate (x16)
2 ABS Model
Material Spool
3 QSR Support
Material Spool
4 PLA Material
Spool
5 PLA Model Head
6 PLA Cooling
Module
Figure 4: Additional Components - Startup Materials
A substrate is the surface upon which a part is built. The same substrate is used for all model materials,
including PLA.
Material spool containing 60 in
Material spool containing 60 in
Material spool containing 60 in
Print head for use with PLA model material only.
Cooling module to be used in conjunction with the PLA model head.
1
2-4
6
3
(984 cc) of ABS model material.
3
(984 cc) of QSR support material.
3
(984 cc) of PLA material.
23