Stratasys F170 Operation And Maintenance Manual page 27

1
Key for Figure 2
Leather Printer components may be extremely hot. To prevent burns or other injuries, these gloves should be worn
1 Safety any time you see the gloves safety sign throughout this document.
Gloves
2 Needle Occasionally, you may need to use pliers to aid in the clearing of debris which have accumulated on the head
Nose Pliers and/or tips.
(extra slim)
3 Needle Occasionally, you may need to use pliers to aid in the clearing of debris which have accumulated on the head
Nose Pliers and/or tips. Please note, this item is not included for F170 printers.
1
(7 / )
8
4 5" Cutters These are used to cut a material spool's filament when unloading and removing materials from the printer.
5 Loupe This tool is included to aid you with performing a Manual Tip Calibration which requires you to view small
Magnifier toolpath relationships.
6 Scraper This tool is used to scrape parts or material off the substrate.
Figure 2: Welcome Kit Contents - Tools
5
21
6
2
3
4