Declaration Of Conformity - Stratasys F170 Operation And Maintenance Manual

LIABILITY STATEMENT
The information in this document is subject to change without notice. Stratasys, Inc. shall not be
liable for errors contained herein or for incidental or consequential damages in connection
with the furnishing, performance, or use of this material. Stratasys, Inc. makes no warranty
of any kind with regard to this material, including, but not limited to, the implied warranties of
merchantability and fitness for a particular purpose. It is the responsibility of the system owner/
material buyer to determine that the Stratasys material is safe, lawful, and technically suitable for
the intended application as well as identify the proper disposal (or recycling) method consistent with
local environmental regulations. Except as provided in Stratasys' standard conditions of sale, Stratasys
shall not be responsible for any loss resulting from any use of its products described herein.
COPYRIGHT STATEMENT
© Copyright 2017 Stratasys Inc. All rights reserved.This document is protected by copyright. No part of this
document may be photocopied, reproduced or translated into another language without the prior written
consent of Stratasys, Inc. All drawings and information herein are the property of Stratasys Inc. All
unauthorized use and reproduction is prohibited.
TRADEMARK ACKNOWLEDGMENTS
Stratasys, F123 Series, F170, F270, F370, Insight, GrabCAD and FDM are trademarks of Stratasys Ltd.
and/or subsidiaries or affiliates and may be registered in certain jurisdictions. All other product names and
trademarks are the property of their respective owners.

DECLARATION OF CONFORMITY

Declaration of Conformity information is available from the Stratasys website at:
customer-support/customer-resource-center/documentation.
EMC CLASS A WARNING
Warning: This is a Class A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.
MSDS (MATERIAL SAFETY DATA SHEET)
You can obtain current Material Safety Data Sheets for the material used in the printer is available at:
http://www.stratasys.com/materials/material-safety-data-sheets.
ii
http://www.stratasys.com/