Special Tools - Yamaha Sirius T110LSE Service Manual

EAS00027

SPECIAL TOOLS

The following special tools are necessary for complete and accurate tune-up and assembly. Use only
the appropriate special tools as this will help prevent damage caused by the use of inappropriate tools
or improvised techniques. Special tools, part numbers or both may differ depending on the country.
When placing an order, refer to the list provided below to avoid any mistakes.
Tool No.
90890-01052
90890-01135
Weight
90890-01084
Slide hammer bolt
90890-01085
90890-01184
90890-01186
90890-01268
90890-01274
Tool name/Usage
Meter gear bush tool
This tool is used to remove or install the
bushing.
Crankcase separating tool
This tool is necessary for separating the
crankcase.
Weight
Slide hammer bolt
These tools are used when removing or
installing the rocker arm shafts.
Fork seal driver weight
This tool is used for to install the oil seal.
Fork seal driver attachment
This tool is used to install the oil seal.
Ring nut wrencht
This tool is used to loosen and tighten
the steering ring nut
Crankshaft instoller pot
This tool is necessary for installing the
crankshaft.
SPECIAL TOOLS
1-5
GEN
INFO
Illustration