Yamaha Sirius T110LSE Service Manual page 155

CLUTCH
4. Tighten:
9clutch boss nut 1
NOTE:
While holding the clutch boss 2 with the univer-
sal clutch holder 3, tighten the clutch boss nut.
Universal clutch holder
90890-04086
5. Bend the lock washer tab along a flat side
of the nut.
6. Lubricate:
9friction plates
9clutch plates #1
9clutch plate #2
(with the recommended lubricant)
Recommended lubricant
Engine oil
7. Install:
9friction plates
9clutch plate #2
(with springs)
9clutch plates #1
NOTE:
First, install a friction plate and then alternate
between a clutch plate and a friction plate.
8. Install:
9clutch springs
9clutch pressure plate 1
9clutch pressure plate bolts 2
NOTE:
Tighten the clutch pressure plate bolts in
stages and in a crisscross pattern.
9. Adjust:
9clutch release system
Refer to
RELEASE SYSTEM" in chapter 3.
4-56
ENG
70 Nm (7.0 m•kg, 50 ft•lb)
6 Nm (0.6 m•kg, 4.3 ft•lb)
"ADJUSTING THE CLUTCH