Assembling The Brake Shoe Plate - Yamaha Sirius T110LSE Service Manual

FRONT WHEEL AND DRUM BRAKE (T110LE)
a
a
3. Measure:
9brake drum inside diameter a
Out of specification → Replace the wheel.
Brake drum inside diameter limit
(maximum)
Front: 111 mm (4.37 in)
Rear: 131 mm (5.16 in)
4. Check:
9brake drum inner surface
Oil deposits → Clean.
Remove the oil with a rag soaked in lacquer
thinner or solvent.
Scratches → Repair.
Lightly and evenly polish the scratches with
an emery cloth.
5. Check:
9brake camshaft
Damage/wear → Replace.
EAS00537
ASSEMBLING THE BRAKE SHOE
PLATE
1. Install:
9brake camshaft 1
9brake shoe wear indicator 2
9brake camshaft 3
MMMMMMMMMMMMMMMMMMMMMMMM
a. Install the brake camshaft so its punch mark
a is positioned as shown.
b. Align the projection on the brake shoe wear
indicator with the notch in the brake
camshaft.
c. Align the punch mark in the brake camshaft
with the mark on the brake camshaft lever.
d. Check that the brake shoes are properly
positioned.
LLLLLLLLLLLLLLLLLLLLLLLL
6-12
CHAS
7 Nm (0.7 m·kg, 5.0 ft·lb)