Adjusting The Clutch Release System - Yamaha Sirius T110LSE Service Manual

CLEANING THE AIR FILTER ELEMENT/

ADJUSTING THE CLUTCH RELEASE SYSTEM

5. Install:
9air filter element
9air filter case cover
cC
Never operate the engine without the air fil-
ter element installed. Unfiltered air will cause
rapid wear of engine parts and may damage
the engine. Operating the engine without the
air filter element will also affect the carbure-
tor tuning, leading to poor engine perfor-
mance and possible overheating.
NOTE:
When installing the air filter element into the air
filter case cover, make sure their sealing sur-
faces are aligned to prevent any air leaks.
6. Install:
9front cowlings (left and right)
9center panel
Refer to "INSTALLING THE FRONT COWL-
INGS".
EAS00086
ADJUSTING THE CLUTCH RELEASE
SYSTEM
1. Adjust:
9clutch release system
MMMMMMMMMMMMMMMMMMMMMMMM
a. Loosen the locknut 1.
b. Turn the adjusting screw 2 in completely,
then turn the adjusting screw out the speci-
fied number of turns.
Adjusting screw:
1/8 turns out
c. Tighten the locknut.
NOTE:
Hold the adjusting screw and tighten the lock-
nut.
LLLLLLLLLLLLLLLLLLLLLLLL
3-18
CHK
ADJ
8 Nm (0.8 m•kg, 5.8 ft•lb)