Removing The Cylinder And Piston - Yamaha Sirius T110LSE Service Manual

1
2
CYLINDER AND PISTON
EASF0028
REMOVING THE CYLINDER AND
PISTON
NOTE:
Prior to removing the cylinder and piston,
remove the cylinder head.
1. Remove:
2. Remove:
1
3. Remove:
cC
Do not use a hammer to drive the piston pin
out.
NOTE:
9Before removing the piston pin clip, cover the
crankcase opening with a clean rag to pre-vent
the piston pin clip from falling into the
crankcase.
9Before removing the piston pin, deburr the pis-
ton pin clip groove and the piston pin bore area
of the piston. If both areas are deburred and
the piston pin is still difficult to remove, remove
it with a piston pin puller set.
4. Remove:
NOTE:
When removing a piston ring, open the end gap
with your fingers and lift the other side of the
ring over the piston crown.
4-32
9cylinder 1
9dowel pins 1
9gasket 2
9piston pin clip 1
9piston pin 2
9piston 3
9top ring
92nd ring
9oil ring
ENG