Checking The Connections - Yamaha Sirius T110LSE Service Manual

Table of Contents

Advertisement

CHECKING THE CONNECTIONS

1
EAS00026
CHECKING THE CONNECTIONS
Check the leads, couplers, and connectors for
stains, rust, moisture, etc.
1. Disconnect:
9lead
9coupler
9connector
2. Check:
9lead
9coupler
9connector
Moisture → Dry with compressed air.
Rust/stains → Connect and disconnect
several times.
3. Check:
9all connections
Loose connection → Connect properly.
NOTE:
If the pin 1 on the terminal is flattened, bend it
up.
4. Connect:
9lead
9coupler
9connector
NOTE:
Make sure all connections are tight.
5. Check:
9continuity
(with the pocket tester)
Pocket tester
90890-03112
NOTE:
8If there is no continuity, clean the terminals.
8When checking the wire harness, perform
steps (1) to (3).
8As a quick remedy, use a contact revitalizer
available at most part stores.
1-4
GEN
INFO

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sirius t110le

Table of Contents