Assembling The Carburetor; Installing The Carburetor - Yamaha Sirius T110LSE Service Manual

a
b
CARBURETOR
11. Check:
9hose joints
Cracks/damage → Replace.
12. Check:
9air vent hose
9fuel hoses
Cracks/damage/wear → Replace.
Obstructions → Clean.
Blow out the hoses with compressed air.
EAS00487

ASSEMBLING THE CARBURETOR

cC
9 9 Before assembling the carburetor, wash all
of the parts in a petroleum-based sol-vent.
9 9 Always use a new gasket and new O-rings.
EAS00492

INSTALLING THE CARBURETOR

1. Install:
9jet needle set
NOTE:
Push the jet needle holder 1 with a Phillips
1
screwdriver, and then turn it to secure it in place.
2. Install:
9throttle valve assembly
NOTE:
Align the slit a of the throttle valve with the tab
b of the carburetor body.
3. Install:
9carburetor joint
9carburetor joint clamp screw
9carburetor assembly
9bolts
4. Adjust:
9engine idling speed
Refer
IDLING SPEED" in chapter 3.
5-7
CARB
10 Nm (1.0 m·kg, 7.2 ft·lb)
Engine idling speed
1,400–1,600 r/min
to "ADJUSTING THE ENGINE