Circlips; Special Tools; For Tune-Up - Yamaha XC125 Service Manual

_GNE_) _ SPECIAL TOOLS
CIRCLIPS
1. All circlips should be inspected carefully
f_t __
!l IJ(_) I_ P before reassembly. Always replace piston
(]_) pin clips after one use. Replace distorted
circlips. When installing a circlip (_), make
/_//__/_/_/ sure that the sharp-edged corner (_ is
__ ////2 positioned opposite to the thrust (]_) it
receives. See the sectional view.
- (_ Shaft
SPECIAL TOOLS
The proper special tools are necessary for
complete and accurate tune-up and assembly.
Using the correct special tool will help pre-
vent damage caused by the use of improper
tools or improvised techniques.
FOR TUNE-UP
1. Inductive Tachometer
P/N YU-8036
This tool is needed for detecting engine rpm.
2. Timing Light
P/N YU-08037
This tool is necessary for checking timing.
3. Compression Gauge
0
This gauge is used to measure engine compression.
1-3