1
1 4 3 2
1
2
1
REAR WHEEL AND BRAKE
EAS00563
REMOVING THE REAR WHEEL
1. Stand the vehicle on a level surface.
w
Securely support the vehicle so that there is
no danger of it falling over.
NOTE:
Place the vehicle on a suitable stand so that the
rear wheel is elevated.
1. Remove:
9drive chain case screws (lower)
9drive chain case (lower) 1
2. Remove:
9brake rod adjusting nut 1
9brake rod 2
9compression spring 3
9washer
9pin 4
NOTE:
Press down on the brake pedal to remove the
pin from the brake rod.
3. Remove:
9cotter pin
9brake torque rod nut 1
9washer
2
9brake torque rod bolt
9brake torque rod 2
4. Loosen:
9chain puller locknuts (left and right) 1
9chain puller adjusting nuts (left and right) 2
6-15
CHAS