Assembling The Brake Shoe Plate; Installing The Rear Wheel - Yamaha Sirius T110LSE Service Manual

REAR WHEEL AND BRAKE
EAS00570
ASSEMBLING THE BRAKE SHOE
PLATE
1. Install:
9brake camshaft 1
9brake shoe wear indicator 2
9brake camshaft lever
MMMMMMMMMMMMMMMMMMMMMMMM
a. Install the brake camshaft so its punch mark
a is positioned as shown.
b. Align the projection b on the brake shoe
wear indicator with the notch in the brake
camshaft.
c. Align the punch mark in the brake camshaft
with the mark on the brake camshaft lever.
d. Check that the brake shoes are properly
positioned.
LLLLLLLLLLLLLLLLLLLLLLLL
EAS00571

INSTALLING THE REAR WHEEL

1. Lubricate:
9spacer
9collar
9wheel axle
9wheel bearings
9rear brake camshaft
9brake torque rod bolt
9oil seal lips
2. Install:
9brake torque rod (to brake shoe plate)
9washer
9cotter pin
3. Install:
9pin
9washer
9compression spring
9brake rod
9brake rod adjusting nut
NOTE:
Press down on the brake pedal to install the
brake rod.
6-19
CHAS
7 Nm (0.7 m·kg, 5.0 ft·lb)
Recommended lubricant
Lithium-soap-based grease
19 Nm (1.9 m·kg, 14 ft·lb)