Table of Contents
Advertisement
Setting the GP-GL Step Size
The distance that the tool moves by for a single step of the command can be changed. If the setting values do
not match, the size of the cutting may become irregular. Match this with the setting value of the software being
used.
This item is available only when using the GP-GL command.
1.
From the "MENU" screen, open the
"INTERFACE 1/3" screen and proceed to
the "INTERFACE 3/3" screen.
2.
Under "GP-GL STEP SIZE", select
"0.100 mm", 0.050 mm", "0.025 mm", or
"0.010 mm".
Chapter 5 Detailed Settings
5-25
Advertisement
Table of Contents
