Setting The Operation Panel; Language Selection; Selection Of Unit For Lengths; Setting The Beep For Key Operation - GRAPHTEC CELITE-50 User Manual

Chapter 5 Detailed Settings
5.9

Setting the Operation Panel

Perform advanced settings for the operation panel.
Once you are done with the setting, touch the

Language Selection

Set the language that will be displayed in the operation panel.
1.
From the "MENU" screen, open the
"ADVANCE 1/3" screen.
2.
Touch the input box for "LANGUAGE
SELECTION".
3.
Select the language to use and confirm
the selection with the

Selection of Unit for Lengths

Set the unit for lengths that will be displayed in the operation panel.
1.
From the "MENU" screen, open the "ADVANCE 1/3" screen.
2.
Under "UNIT OF LENGTH", select "METRIC" or "INCH".

Setting the Beep for Key Operation

Set whether to sound a buzzer each time the keys on the operation panel are touched.
1.
From the "MENU" screen, open the
"ADVANCE 1/3" screen and proceed to the
"ADVANCE 2/3" screen.
2.
Select "ON" or "OFF" for "BEEP FOR KEY
OPE.".
5-26
(Exit) to return to the "HOME" screen.
(Confirm).