Cut-Sheet Paper Feeder; Installation - Brother EM-850fx User Manual

Cut-sheet Paper Feeder CF-300
The cut-sheet paper feeder CF-300 is optionally available lot this typewriter.
Once you set a slack o f cut sheet paper, the feeder can automatically insert a
sheet on demand.

Installation

h o llo w these steps to install the cut-sheet paper feeder CF-300 onto this
ty p e w rite r:
111
|2)
1X2
Turn o ff the typewriter.
Remove the paper support assembly and the plastic spacer located in front
o f it.
Open the acoustic cover and remove the paper support assembly. H old the
plastic spacer by its tip and lift it up until it comes o ff the position.
Close the acoustic cover.