Automatic Paper Insertion (With Cut Sheet Feeder) - Brother Ensemble PDP-300CJ Owner's Manual

Automatic Paper Insertion (with Cut Sheet Feeder)

UP position DOWN position
Paper recommendations: high
quality bond, 16–24 lb.
The back paper tray of the cut
sheet feeder is designed to
handle 16–24 lb. bond 8.5" x 1 1"
or A4 paper only . If you want to
insert another weight or size,
such as an envelope, use the
front paper tray of the cut sheet
feeder.
Getting Started 12
" To load paper into the cut sheet feeder:
1. Push down on the tabs on both sides of the paper tray to move the paper
release lever into the UP position.
2. Pick up no more than 30 sheets of 8-1/2" x 11" letter or A4-size (210 mm
x 297 mm) paper.
3. Fan the paper before loading it.
4. Load the paper into the back paper tray.
5. Tap the edges of the paper stack to align the edges.
Paper Release Lever