Erasing Frames And Lines - Brother EM-850fx User Manual

[3] Press the CODE + FRAME keys.
The message lamp indicates the F character with a period "F." and the
typewriter now allows you to draw a line.
[4] Move the earner to the end o f the line by using the
(Index),
vertical line; or the SPACEBAR or — > (Cursor Left) for a horizontal
line.
[5] Press the CODE + FRAME keys.
The line is drawn and the message lamp then shows the current line
format number.
[6] To draw additional lines, repeat steps 2 through 5.

Erasing Frames and Lines

Before you begin the following steps, be sure to select the TYPE mode.
Follow these steps to erase frames and lines:
[1] Move the carrier to the starting point of the drawn frame or lines.
To move the carrier, use the carrier motion key such as CURSOR ( J ,,
, or — > ), SPACEBAR, K— I (Backspace), — R (Tab), CODE +
B TAB, CODE
CODE + J (Micro Index), C O D E + J (Micro Reverse Index), and
(Return) keys.
[2] Press the CODE + CORRECTION keys.
[3] Press the CODE + FRAME keys.
[4] Move the carrier to the ending point of the drawn frame or lines.
If the frames or lines to delete are double-lines, press the double­
underline key on the alphanumeric keyboard before going to the next step.
[5] Press the CODE + FRAM E keys again.
The drawn frames and lines are erased.
(Cursor Down), or CODE + J (Micro Index) keys for a
(Backspace 1), J (Index), { (Reverse Index),
(Return), {
113