Brother EM-850fx User Manual page 217

A DISK CHANGED -> PRESS '< J ' (RETRY) / 'D ELETE' (ABANDON)
/ 'END' (STORE)
The different disk is now in the disk drive. Insert the proper disk and
press the (Return) key. Press the ESC key to return to the edit screen.
Press the CODE + 2 (DELETE) keys to delete the current editing file.
Or press the END key to save it into the internal memory.
A DISK CHANGED -> RE-INSERT PREVIOUS DISK AND PRESS
The different disk is now in the disk drive. Reinsert the proper disk and
press the (Return) key to continue the operation.
A DISK FULL
You have reached the limit of the disk storage capacity. Delete
unnecessary files or insert another disk to store files.
• Because of file/disk copying, no room is left in the disk.
• Because of less disk capacity, you cannot open a new file.
A DISK FULL AND DISK COPY CANCELED
While copying a disk, the operation is canceled halfway because the
destination disk becomes full.
A DISK I/O ERROR AND CURRENT/TEMPORARY PHRASE
D E L ET ED
The disk error occurs because of power off or the damage to the phrase file
while loading it from the disk. The loading phrase file is cleared.
ad DISK NOT READY
You cannot access the data in a disk because the disk is not set in the drive.
Insert the disk in the drive properly.
A DISK NOT READY - > PRESS '« J ' (RETRY) / 'D ELETE' (DELETE)
/ 'END' (STORE)
The disk is not set in the drive. Insert the disk in the drive properly and
press the (Return) key. Press the ESC key to return to the edit. Press
the CODE + 2 (DELETE) keys to delete the current editing file. Or
press the END key to save it into the internal memory.
ad DISK PROTECTED
You cannot write on a write-protected disk. Push the write-protect tab
and close the window to remove the protection.
A DISK PROTECTED - > PRESS '< J ' (RETRY) / 'D E L ET E' (DELETE)
/ 'END' (STORE)
• The write-protected disk is now in the disk drive. Push the write-protect
tab and close the window to remove the protection. Reinsert the disk and
press the (Return) key. Press the ESC key to return to the edit. Press
the CODE + 2 (DELETE) keys to delete the current editing file. Or
press the END Key to save it into the internal memory.
/I DOWN MEMORY
The system was reset. All the data are lost from the memory.