Collection Tape - Brother EM-850fx User Manual

Correction Tape
A correction tape is used to correct a misspelling or delete words and lines you
typed. On this typewriter, two types of correction tapes are available. You
need to select the correction tape according to the ribbon you install. Lift-off
correction tapes are used for correctable carbon ribbons. Cover-up correction
tapes are used for multi-use carbons, one-time carbons, and fabric ribbons. For
more information about the correction tapes, consult the dealer where you
purchased the typewriter.
Whichever correction tape you use, follow these steps to install the tape:
[1]
[2]
[3]
[4]
[5]
[6]
[7]
[8]
[9]
[10] Close the top cover.
20
Open the top cover.
Move the carrier to the middle of the typewriter for easy installation.
If the typewriter is on, press the SPACEBAR orK— I (Backspace) key
to center the carrier before you open the top cover.
Remove the ribbon cassette.
Remove the right and left spools and correction tape from the carrier.
You may skip this step if no correction tape is installed.
Install the left spool.
Let the correction tape go across the guide rollers and over the correction
tape guides on both the right and left sides.
Make sure that the active side of the correction tape faces the platen.
Install the right spool.
Take up the slack by turning the right spool.
Install the ribbon cassette.