Table of Contents
Advertisement
4.3.2Broadcast Mode
The main page of broadcast mode was shown in the Figure 4-26. This page can send or receive
data from peer device in broadcast mode. It also can load the configuration from the module.
Open the COM port
It needs to make a serial connection between BLE-USB and host PC. The utility will
check the broadcast mode after you click the "Open Port" button. If the module wasn't in
the broadcast mode, the warring message would be shown after you clicked the "Open
Port" button. User need switch module to the broadcast mode (refer to 4.2). If the serial
port setting was incorrect, the error would be shown after you clicked the "Open Port"
button. Please check the serial setting is correct, and re-open COM port again.
Figure 4-27. Warring message
Figure 4-26. Main page of broadcast mode
BLE-USB, USB to Bluetooth Low Energy Converter (Ver. 1.0, Oct/6/2016) 58
Figure 4-28. Error message
Advertisement
Table of Contents
