At+Gid - ICP DAS USA BLE-USB User Manual

Usb to bluetooth low energy converter

Hide thumbs Also See for BLE-USB:

Table of Contents

(4) Example

AT+SDN=1<CR>

OK<CR><LF>

AT+SDN?<CR>

+SDN: 1<CR><LF>

OK<CR><LF>

AT+SDN=77<CR>

OK<CR><LF>

AT+SDN=777<CR>

OK<CR><LF>

AT+SDN=?<CR>

+SDN: 0~999<CR><LF>

OK<CR><LF>

AT+SDN=1000<CR>

Error: 01<CR><LF>

AT+SDN=ABCD<CR>

Error: 01<CR><LF>

AT+SDN<CR>

Error: 04<CR><LF>

3.1.16

AT+GID

(1) Description

This command is used to change the "Group ID" at the module. The device will receive the

packet when both of the Group ID is same in the broadcast or connection mode. The Group

ID isn't same and the device will discard the packet. The Group ID is "0", and it will

receive all packets of the group.

(refer to 3.1.25)

BLE-USB, USB to Bluetooth Low Energy Converter (Ver. 1.0, Oct/6/2016) 30

Table of Contents