At+Sdn - ICP DAS USA BLE-USB User Manual

Usb to bluetooth low energy converter

Hide thumbs Also See for BLE-USB:

Table of Contents

3.1.15

AT+SDN

(1) Description

This command can set the device name of slave when the slave was broadcast in the

connection mode. The master (mobile device) can use the device name to identify slave.

(2) Syntax

Write Command

AT+SDN=<number><CR>

Read Command

AT+SDN?<CR>

Test Command

AT+SDN=?<CR>

(3) Parameter

The number of device

Range: 0~999

Default: 720

Device name

Figure 3-2. Screenshot of mobile device APP

Response

OK<CR>

Error: 01<CR><LF>

Response

+SDN: <number><CR><LF>

OK<CR><LF>

Response

+SDN: 0~999<CR><LF>

OK<CR><LF>

BLE-USB, USB to Bluetooth Low Energy Converter (Ver. 1.0, Oct/6/2016) 29

(refer to 3.1.25)

Table of Contents