At+Tpl - ICP DAS USA BLE-USB User Manual

AT+GID<CR>
Error: 04<CR><LF>
3.1.17

AT+TPL

(1) Description
This command can change the RF power when the module was send the broadcast or
connection packet.
(2) Syntax
Write Command
AT+TPL=<Level><CR>
Read Command
AT+TPL?<CR>
Test Command
AT+TPL=?<CR>
(3) Parameter
The RF power level
Range: 0~8
0: 0 dBm
1: 1 dBm
2: 2 dBm
3: 3 dBm
< Level >
4: 4 dBm
5: -5 dBm
6: -10 dBm
7: -15 dBm
8: -20 dBm
Default: 4
(refer to 3.1.25)
Response
OK<CR>
Error: 01<CR><LF>
Response
+TPL: < Level><CR><LF>
OK<CR><LF>
Response
+TPL: 0~8<CR><LF>
OK<CR><LF>
BLE-USB, USB to Bluetooth Low Energy Converter (Ver. 1.0, Oct/6/2016) 32
(refer to 3.1.25)