ICP DAS USA BLE-USB User Manual page 52


Step4
The step 4 is used to change the Master identify mechanism.

Enable Master Identify Mechanism: Enable or disable Master identify mechanism
(refer to 1.6

Identify Key: Set the identification packet (refer to

Step5
The step 5 can change the baud rate, send mode and RF power.

Baud rate: the baud rate of BLE-USB (refer to 3.1.7).
Figure 4-7. Connection parameter setting
and 3.1.21).
Figure 4-8. Master identify mechanism setting
BLE-USB, USB to Bluetooth Low Energy Converter (Ver. 1.0, Oct/6/2016) 52
1.6 and 3.1.22).