Table of Contents
Advertisement
receive data from peer device in connection mode. It also can load the configuration from the
module.
Open the COM port
It needs to make a serial connection between BLE-USB and host PC. The utility will
check the transmission mode after you click the "Open Port" button. If the module wasn't
in the connection mode, the warring message would be shown after you clicked the "Open
Port" button. User need switch module to the connection mode (refer to 4.2). If the serial
port setting was incorrect, the error would be shown after you clicked the "Open Port"
button. Please check the serial setting is correct, and re-open COM port again.
Figure 4-16. Warring message
Figure 4-15. Main page of connection mode
BLE-USB, USB to Bluetooth Low Energy Converter (Ver. 1.0, Oct/6/2016) 55
Figure 4-17. Error message
Advertisement
Table of Contents
