Configuration Utility - ICP DAS USA BLE-USB User Manual

4. Configuration Utility

The tBLE-720/BLEUSB utility had four functions. It can load the configuration, write the
configuration, update the firmware and test the module.
4.1 Main Window of tBLE-720/BLE-USB Utility
User can load the configuration in the main page. First, it need select the COM port and baud
rate. Second, it need press "Open Port" button, and the utility would automatically load the
configuration. If load configuration was success, and the result was shown in
configuration was fail, and the result was shown in
Figure 4-1. load success
4.2 Configuration on Utility
Set
The setting page was shown in
configuration. The "Recovery Factory Setting" can recovery module to factory setting.
4-3. The "Basic Parameter Setting" page can set up the
Figure
Figure 4-3. Setting configuration page
BLE-USB, USB to Bluetooth Low Energy Converter (Ver. 1.0, Oct/6/2016) 49
.
Figure 4-2
Figure 4-2. load fail
If load
Figure 4-1.