ICP DAS USA BLE-USB User Manual page 47

3.2.3 +ADP
(1) Description
This command is used to stop broadcast packet transmission.
(2) Syntax
Execution Command
+ADP<CR>
(3) Example
+ADP<CR>
OK<CR><LF>
+ADP<CR>
Error: A1<CR><LF>
+ADP<CR>
Error: A5<CR><LF>
3.2.4 +ADR
(1) Description
This command can show the RSSI of Broadcaster when the module was the Observer.
(2) Syntax
Execution Command
+ADR<CR>
Response
OK<CR><LF>
Error: A1<CR><LF>
Error: A5<CR><LF>
(refer to 3.1.25)
(refer to 3.1.25)
Response
+ADR: <mac address>,<RSSI>
OK<CR><LF>
Error: A1<CR><LF>
Error: A4<CR><LF>
BLE-USB, USB to Bluetooth Low Energy Converter (Ver. 1.0, Oct/6/2016) 47
(refer to 3.1.25)
(refer to 3.1.25)
(refer to 3.1.25)
(refer to 3.1.25)