At+Di - ICP DAS USA BLE-USB User Manual

AT+CN?<CR>
+CN: 1<CR><LF>
OK<CR><LF>
AT+CN=?<CR>
+CN: 0 <CR><LF>
OK<CR><LF>
AT+CN=1<CR>
Error: 03<CR><LF>
AT+CN<CR>
Error: 04<CR><LF>
3.1.10

AT+DI

(1) Description
This command can show the device information.
(2) Syntax
Read Command
AT+DI?<CR>
Test Command
AT+DI=?<CR>
(3) Parameter
<manufacturer>
<version>
<stack version>
(refer to 3.1.25)
(refer to 3.1.25)
Response
Manufacturer:
Firmware Version:
BLE Version:
OK<CR><LF>
Response
OK<CR><LF>
The identification of manufacturer.
The identification of firmware version.
The identification of Bluetooth LE stack version.
BLE-USB, USB to Bluetooth Low Energy Converter (Ver. 1.0, Oct/6/2016) 24
<manufacturer>
<version>
<stack version>