Init / Normal Jumper; Firmware Update Mode - ICP DAS USA I-7567 User Manual

2.4

Init / Normal Jumper

Open the shell of I-7567 and there is a jumper (JP1) on the PCB of I-
7567 is used for firmware operation or firmware updating function of I-
7567 module.
Figure 2-7: Firmware Operation

2.4.1 Firmware Update Mode

Please follow the below steps to complete the firmware update
process of I-7567.
(1) Set the jumper (JP1) to the firmware updating position like Figure 2-8
and reboot I-7567. Then I-7567 will work in the "Firmware Update
Mode". In this mode, users can update the firmware of I-7567 module
via USB and the I-7567 will become a "USB Mass Storage" device like
Figure 2-9.
I-7567 USB/HART Converter User's Manual (Ver 1.3, 2015/10/30) ------------- 13
Figure 2-8: Firmware Updating