ICP DAS USA BLE-USB User Manual page 60

Usb to bluetooth low energy converter

Hide thumbs Also See for BLE-USB:

Table of Contents

4.4

Firmware Upgrade

Although the utility support two types for firmware upgrade, but the BLE-USB only supports

OTA firmware upgrade. The OTA firmware upgrade need Bluetooth interface in your computer.

The Bluetooth interface must be compiling with the Bluetooth 4.0 standards. If you don't have

Bluetooth interface in your computer, you need to buy a

execute "Firmware Upgrade" and follow the below steps to complete the firmware upgrade

process.



Disable the Master identification mechanism

You need to disable the Master identification mechanism (refer to 3.1.21). The Master

identification mechanism can disable by utility (refer to 4.2.1) or AT command.

Figure 4-34. Receive data

on Utility

Figure 4-35. Firmware upgrade page

BLE-USB, USB to Bluetooth Low Energy Converter (Ver. 1.0, Oct/6/2016) 60

BLE USB

dongle. Users just need to

Table of Contents