Table of Contents
Advertisement
Step2 ~ 5
User can select different parameters in the step2 to step5. When the configuration was
selected, you could click the "Next" button. The "Next" button will be switching to next
step. You also can use the "Previous" button, and it will back to the previous step. All of
the configurations will upload to the module in the step6.
Step2
The Step 2 can change broadcast parameter.
Broadcast role: role of broadcast mode (refer to
Broadcast channel: change the broadcast channel when the module was in the
broadcast mode (refer to 3.1.6).
Broadcast Interval: how often to send a broadcast packet
Step 3
The step 3 can change the connection parameter.
Connection role: role of connection mode (refer to
Peer amount: Maximum amount of slave (refer to 3.1.13)
Slave device number: the device name of slave when slave is advertising.(refer to
3.1.15)
Group ID: the ID of connection group (refer to 3.1.16).
Figure 4-6. Broadcast parameter setting
BLE-USB, USB to Bluetooth Low Energy Converter (Ver. 1.0, Oct/6/2016) 51
1.5.2
and 3.1.24).
1.5.1
and 3.1.20)
Advertisement
Table of Contents
