Table of Contents
Advertisement
4.2.1 Basic Parameter Setting Page
The basic parameter setting page was shown in the Figure 4-4. The basic parameter setting had
6 steps. User can load the configuration in the step 1. The configuration can save in the step6.
The "Next" button can go into next step. The "Previous" button can go back to previous step.
Step1
The step 1 was established serial wire connection between BLE-USB and host PC. If the
COM port already opened in the main page, the COM port will automatically open when
you enter this page. If the configuration was saved in the step 6, you could load the
configuration by "Load Configuration" button. The filename extension of configuration is
*.txt. The Figure 4-5 is a warning message when the COM port opens fail. Please check
the COM port number and baud rate is correct.
Figure 4-4. Basic parameter setting
Figure 4-5. Open COM port fail
BLE-USB, USB to Bluetooth Low Energy Converter (Ver. 1.0, Oct/6/2016) 50
Advertisement
Table of Contents
