Firmware Operation Mode - ICP DAS USA I-7530A-MR User Manual

Figure 2-15: I-7530A-MR firmware update process
The I-7530A-MR firmware can be downloaded from
http://ftp.icpdas.com/pub/cd/fieldbus_cd/can/converter/i-7530a-mr/firmware/
The "Firmware_Update_Tool" program can be downloaded from
http://ftp.icpdas.com/pub/cd/fieldbus_cd/can/converter/i-7530a-mr/utility/
2.5.2

Firmware Operation Mode

Please set the DIP-switch to the "Normal" position as Figure 2-16 and
power on the I-7530A-MR module. The module's PWR LED always
turned on and the others LEDs are turned off. That means the I-7530A-
MR module is working in the operation mode. In this mode, users can use
the RS-232/485/422 device to send/receive CAN messages via COM port.
I-7530A-MR Modbus RTU to CAN Converter User's Manual (Version 1.07, 06/2016) ------------- 17
1
2
4
3
6
5