Sleep Mode Countdown
Set Sleep Mode Countdown
The Sleep Mode (or Power Save Mode) setting can reduce power consumption. When the machine is in Sleep
Mode, it acts as though it is turned off. The machine will wake up and start printing when it receives a print job or
a fax. Use these instructions to set a time delay (countdown) before the machine enters Sleep Mode.
You can choose how long the machine must be idle before it goes into Sleep Mode.
The timer will restart if any operation is carried out on the machine, such as receiving a print job.
1. Press Menu.
2. Press a or b to display the [General Setup] option, and then press OK.
3. Press a or b to display the [Ecology] option, and then press OK.
4. Press a or b to display the [Sleep Time] option, and then press OK.
5. Using the dial pad, enter the length of time the machine (maximum 50 minutes) is idle before entering Sleep
Mode, and then press OK.
6. Press Stop/Exit.
Change Machine Settings from the Control Panel