Select this option to automatically display the destination folder after scanning.
File Size Priority
Adjust the data compression ratio of the scanned image. Change the file size by moving the File Size Priority
slider to the right or left.
Select a scanning resolution from the Resolution drop-down list. Higher resolutions take more memory and
transfer time, but produce a finer scanned image.
Select from a range of scan colour depths.
Use for any type of document. This mode automatically picks an appropriate colour depth for the
Black & White
Use for text or line art images.
Grey (Error Diffusion)
Use for photographic images or graphics. (Error Diffusion is a method for creating simulated grey
images without using true grey dots. Black dots are put in a specific pattern to give a grey appearance.)
Use for photographic images or graphics. This mode is more accurate because it uses up to 256
shades of grey.
Use to create an image with the most accurate colour reproduction. This mode uses up to 16.8 million
colours to scan the image, but it requires the most memory and has the longest transfer time.
Select the exact size of your document from the Document Size drop-down list.
If you select the 1 to 2 (A4) option, the scanned image will be divided into two A5-size documents.
Set the Brightness level by dragging the slider to the right or left to lighten or darken the image. If the
scanned image is too light, set a lower brightness level and scan the document again. If the image is too dark,
set a higher brightness level and scan the document again. You can also type a value into the field to set the
Increase or decrease the Contrast level by moving the slider to the right or left. An increase emphasises dark
and light areas of the image, while a decrease reveals more details in grey areas. You can also type a value
into the field to set the Contrast level.
ID Card Scan
Select this check box to scan both sides of an identification card onto one page.
Configure advanced settings by clicking the Advanced Settings button in the Scan Settings dialog box.
Remove Bleed-through / Pattern
Remove Background Colour
Remove the base colour of documents to make the scanned data more legible.
Rotate the scanned image.
Skip Blank Page
Remove the document's blank pages from the scanning results.