Using Web Based Management
Access Web Based Management
We recommend using the HTTPS security protocol when configuring settings using Web Based
When you use HTTPS for Web Based Management configuration, your browser will display a warning
1. Start your web browser.
2. Type "http://machine's IP address" in your browser's address bar (where "machine's IP address" is the
machine's IP address).
If you are using a Domain Name System or enable a NetBIOS name, you can type another name, such
as "SharedPrinter" instead of the IP address.
If you enable a NetBIOS name, you can also use the node name.
The NetBIOS name can be found in the Network Configuration Report.
For Mac, access Web Based Management by clicking the machine's icon on the Status Monitor
3. No password is required by default. Type a password if you have set one, and then click
You can now change the print server settings.
If you change the protocol settings, you must restart the machine after clicking Submit to activate the
Change Machine Settings Using Web Based Management
Print the Network Configuration Report
Change Machine Settings from Your Computer
> Access Web Based Management
Change Machine Settings