Click to start uploading data to the machine, and then exit the Remote Setup Program. If an error message
appears, confirm that your data is correct, and then click OK.
Click to exit the Remote Setup Program without uploading data to the machine.
Click to upload data to the machine without exiting the Remote Setup Program.
5. Click OK.
If your computer is protected by a firewall and is unable to use Remote Setup, you may need to configure the
firewall settings to allow communication through port numbers 137 and 161.
If you are using Windows
disc, the necessary firewall settings have already been set.
Remote Setup (Windows
Firewall and you installed the Brother software and drivers from the installation