Using Web Based Management
Set Up Your Machine's Address Book Using Web Based Management
We recommend using the HTTPS security protocol when configuring settings using Web Based
When you use HTTPS for Web Based Management configuration, your browser will display a warning
1. Start your web browser.
2. Type "http://machine's IP address" in your browser's address bar (where "machine's IP address" is the
machine's IP address).
If you are using a Domain Name System or enable a NetBIOS name, you can type another name, such
as "SharedPrinter" instead of the IP address.
If you enable a NetBIOS name, you can also use the node name.
The NetBIOS name can be found in the Network Configuration Report.
For Mac, access Web Based Management by clicking the machine's icon on the Status Monitor
3. No password is required by default. Type a password if you have set one, and then click
4. Click the Address Book tab.
5. Add or update the Address Book information as needed.
6. Click Submit.
Change Machine Settings Using Web Based Management
Remote Setup (Windows
Remote Setup (Mac)
Change Machine Settings from Your Computer
> Set Up Your Machine's Address Book Using Web Based Management
Change Machine Settings