Network Security Features
Certificates and Web Based Management
Certificate from a Certificate Authority (CA)
Install a Certificate on Your Brother Machine
When you receive a certificate from a CA, follow the steps below to install it into the print server:
Only a certificate issued with your machine's CSR can be installed onto the machine. When you want to create
another CSR, make sure that the certificate is installed before creating another CSR. Create another CSR only
after installing the certificate on the machine. If you do not, the CSR you create before installing will be invalid.
1. Start your web browser.
2. Type "http://machine's IP address" in your browser's address bar (where "machine's IP address" is the
machine's IP address).
If you are using a Domain Name System or enable a NetBIOS name, you can type another name, such
as "SharedPrinter" instead of the IP address.
If you enable a NetBIOS name, you can also use the node name.
The NetBIOS name can be found in the Network Configuration Report.
For Mac, access Web Based Management by clicking the machine's icon on the Status Monitor
3. No password is required by default. Type a password if you have set one, and then click
4. Click the Network tab.
5. Click the Security tab.
6. Click Certificate.
7. Click Install Certificate.
8. Browse to the file that contains the certificate issued by the CA, and then click Submit.
The certificate has been created successfully and saved in your machine's memory successfully.
To use SSL/TLS communication, the Root Certificate from the CA must be installed on your computer. Contact
your network administrator.
Create and Install a Certificate from a Certificate Authority (CA)
Manage Your Network Machine Securely Using SSL/
Create and Install a Certificate
> Install a Certificate on Your Brother Machine
Create and Install a