Move your mouse to the lower right corner of your desktop. When the menu bar appears, click Settings >
Control Panel > Hardware and Sound > View devices and printers > Add a device.
> Windows System > Control Panel. In the Hardware and Sound group, click Add a device.
To use a Windows
your network in advance. For more information, see the instructions supplied with your wireless LAN
If you use Windows
after the wireless configuration by following the on-screen instructions. To install the full driver and
software package, use the Brother installation disc.
10. Select your machine and click Next.
11. Type the PIN displayed on the machine's LCD, and then click Next.
7) Select your network, and then click Next.
13. Click Close.
If your wireless device is connected successfully, the machine's LCD displays [Connected].
You have completed the wireless network setup. To install Full Driver & Software Package necessary for
operating your device, insert the Brother installation disc into your computer or go to your model's Downloads
page on the Brother Solutions Center at support.brother.com.
Additional Methods of Configuring Your Brother Machine for a Wireless Network
Wireless LAN Report Error Codes
8, or Windows
8, or Windows
10 computer as a Registrar, you must register it to
10 as a Registrar, you can install the printer driver