If your WLAN access point/router supports WPS, [WPS is available] appears. To connect your
machine using the automatic wireless mode, press a. (If you choose [No], enter the Network Key you
wrote down in the first step.) When [Press WPS on rtr] appears, press the WPS button on your
WLAN access point/router, and then press a twice.
10. The machine attempts to connect to the wireless device you have selected.
If your wireless device is connected successfully, the machine's LCD displays [Connected].
You have completed the wireless network setup. To install Full Driver & Software Package necessary for
operating your device, insert the Brother installation disc into your computer or go to your model's Downloads
page on the Brother Solutions Center at support.brother.com.
Additional Methods of Configuring Your Brother Machine for a Wireless Network
How to Enter Text on Your Brother Machine
Wireless LAN Report Error Codes